5-1/2" Clincher
Lockjaw Tong
The
Clincher Lockjaw Tong and Backup system can do the work
traditionally requiring up to three different sets of
tools to run CRA or Fiberglass tubulars, as well as carbon
steel casing and tubing.
| Maximum
Torque |
18,000
ft. lbs. / 24.405 Nm |
| Operating
Pressure |
3,000
ft. lbs./ 20.7 MPa |
| Handling
Length |
Tong
- 24-12" / 62.23 cm
Backup - 29" / 73.66 cm
|
| Overall
Height |
47
- 12" 120.65 cm |
| Overall
Length |
62
- 7/8" 159.70 cm |
| Overall
Width |
24
- 12" / 62.33 cm |
| Weight
/ Tong |
1,000
lbs. / 455 kg |
| Weight
/ Backup |
700
lbs. / 318 kg |
| Jaw
Capacity / Tong |
2-16"
thru 5-12" |
| Jaw
Capacity / Backup |
2-16" thru
5-12" |
Lockjaw
System
Adds a third jaw and die to increase tong die to increase
tong die coverage while providing a means to prevent the
ring gear from spreading at high torques.
Splined
Die System
Aligns the die with the tubular and more evenly distributes radial load, essentially
wrapping the die around the tube reduces pipe stress, deformation and minimizes
marking.
Compensating
Jaw
Provides a means of limiting the amount if radial load applied to the tube to
minimize pipe stress and deformation.
Die
Retention
Provides an enhanced method of preventing equipment damage and die loss if the pipe is inadvertently moved while the tong or backup are still gripping the pipe.
back
to CRA page |
